#USB FLOPPY DRIVE EMULATOR AMIGA HOW TO#
I actually haven't tried selecting images manually from the front panel - I don't know how to select image for DF1 - this is why I configured the startup HFE images.īoth drives work correctly with this configuration and lasted through several reboots with no issues. HFE images I had on my SD card and booted the Amiga. I have configured mine to use STARTUPA.HFE and STARTUPB.HFE images mapped to DF0 and DF1 respectively, simply renamed two of. The image shows actual settings for two drives that I have just verified. You also need to configure the SD card correctly using the tool, it will save a file HXCSDFE.CFG that needs to go to the root of the card. You can clearly see that ID0A and ID1B are set to ON. This is a picture of my actual drive - it's the SD version in shape of regular floppy drive. You need the following jumper settings to have HxC correctly emulate two drives !! EDITED to reflect settings that I have tried on my Amiga to verify. To get the original Amiga feeling with floppy drive noise. It is available in the colors black and light grey (Picture 1 and 2, please select above). In fact, if I read the specification for the config file, it seems that these fields are not even part of the config file! So how can they be set? The Gotek floppy emulator has a USB port, a green LED, two buttons, a 7 segment display (Picture 1 and 2) or a OLED display with a resolution of 128 x 32 pixels and a rotary knob (Picture 3 and 4). Worringly, if I then restart the app and load the same config back in, my changes in 6.1 have been preserved, but my changes in 6.2 have gone back to the default of auto.
Unpack the SDHxCFE_Amiga.zip file onto the SD card.
#USB FLOPPY DRIVE EMULATOR AMIGA DOWNLOAD#
Download the QuickInstall_FloppyDiskImages.zip file from the HxC website and unpack to a temporary location.Update: here is how I have configured the SD card. The HxC does seem to be jumpered correctly (DS0 connected to drive A, DS1 connected to drive B) and there are no other drives, internal or external, connected. On the first boot after power-up, the Amiga detects both DF0: and DF1. Don’t forget to cross connect the TX and RX lines between the adapter and the usb drive (adapter TX on USB drive RX and adapter RX on USB drive TX). It's working well replacing DF0: but I'm seeing some odd behaviour with its emulation of DF1. The Gotek Floppy emulator working on an Amiga 600 running the State Of The Art Demo : Actual main features of this firmware : Read & Write 880KB ADF Files. I've recently purchased a HxC/Lotharek SD Card floppy drive emulator.
0 kommentar(er)
